RISCO Group Gardtec GT600 - Manual (Page 22)

Page 20
GT 600 / 601 Engineer’s Reference Guide
43) If you do not wish to put a Zone(s) on Test press
Yes and jump to Step 48.
Otherwise
44) Press No. The display will show:-
45) Enter the Zone number you wish to place on test
followed by Yes.
The display will show for example:-
46) To add more Zone(s) to the test repeat from
Step 44.
47) When you have finished adding Zones to Test
press Yes.
48) The display will show:-
Test 003
Enter Zone # _ _ _
then +YES or -NO
Pt-1 None