Rugged Cams HD Megapixel - Manual (Page 164)

164
 Choose a camera name between DVR and CMS setting or both.
- By DVR setting: Display camera name of DVR.
- By CMS setting: Display Camera name of CMS.
- Both: Display both as [DVR name]-[CMS name].
 Type the name of each camera in “Camera Name” item.
 Users will be able to type not only in English but also their own languages.
 It is possible to erase all names by clicking “Clear all names”.
 Save and close the setting panel by clicking “OK”.
 If users wish to exit without saving, then click “Cancel”.
 This function automatically detects and registers units where currently connected to local networks.
 Click “Scan DVR”, then following will pop up.
18.1.1.2 Edit Registered Site
 Select a site to adjust on local setup window and click “Edit”
 Change the setting then click “OK” to save and exit.
18.1.1.3 Remove Registered Site
 Select a site to delete on local setup window and click “remove”
 The site will be removed on the local setup window.
18.1.2 Device Group Setup
 It is possible to make a group of multi-devices for user’s convenience.
- Users are able to combine multiple devices as one group of connection for easy control.
- Users are able to extract the cameras from different registered DVRs to make own group of channel.
Scan DVR
Camera