Rugged Cams HD Megapixel - Manual (Page 46)

46
 Check (check box next to the camera that wish to include in sequencing. Any camera with unchecked check box will be
excluded from channel sequencing.
 Adjust the rotation interval of camera by clicking Dwell column. The rotation interval changes to 3>5>10>15>30>60 seconds
by each press.
(Note)
C, F, G, and H type does not have a spot connection.
4.3.4 Spot Monitor Control on Display Mode
 A Type : Every click of the “SPOT” menu item on mouse right click menu will indicate “SP”, “SP1” on the right bottom of
main monitor.
- SP mode: Sequential display is activated as configured on spot monitor Setup menu.
- SP1 mode: Displayed channel on Spot monitor 1 can be changed by pressing channel button. Sequence stops at “SP1”
mode.
 B, D, E and I Type : Every click of the “SPOT” menu item on mouse right click menu will indicate “SP”, “SP1”, “SP2” and
“SP3” on the right bottom of main monitor. After “SP3”, it shows nothing. And system gets out of spot monitor control mode.
- SP mode: Sequence is activated as configured on spot monitor Setup menu.
- SP1 mode: Displayed channel on Spot monitor 1 can be changed by pressing channel button. Sequence stops at “SP1”
mode.
- SP2 mode: Displayed channel on Spot monitor 2 can be changed by pressing channel button. Sequence stops at “SP2”
mode.
- SP3 mode: Displayed channel on Spot monitor 3 can be changed by pressing channel button. Sequence stops at “SP3”
mode.
4.3.5 Multi Spot (E and D Type)
 This connection supports multi-channel display (1/4/9/16) on spot monitor depending on its channels (4/8/16)
 Click [MS] button on the menu bar to select the Multi Spot.
 Click [1/4/9/16] button to select the multi channel split display mode
 Please click ( ) DISPLAY>Multi Spot and the following screen will appear.
 The Multi Spot menu will allow user to adjust channel sequencing interval of Spot monitor.
 Adjust interval for ‘Full screen sequencing’.
 Check  check box next to the camera that wish to include in sequencing. Any camera with unchecked check box will be
excluded from channel sequencing.
 Adjust the rotation interval of camera by clicking Dwell column. The rotation interval changes to 3>5>10>15>30>60 seconds
by each press.
 Use only with 8 / 16 channel DVRs.
 Adjust interval for ‘X4 Split Screen sequencing’.
Quad Seq
Full Seq