Rugged Cams HD Megapixel - Manual (Page 45)

45
 The Main Monitor menu will allow user to adjust channel sequencing interval of Main monitor.
 Adjust interval for ‘Full screen sequencing’.
 Check  check box next to the camera that wish to include in sequencing. Any camera with unchecked check box will be
excluded from channel sequencing.
 Adjust the rotation interval of camera by clicking Dwell column. The rotation interval changes to 3>5>10>15>30>60 seconds
by each press.
 Use only with 8 / 16 channel DVRs.
 Adjust interval for ‘X4 Split Screen sequencing’.
 Check  check box next to the camera that wish to include in sequencing. Any camera with unchecked check box will be
excluded from channel sequencing.
 Adjust the rotation interval of camera by clicking Dwell column. The rotation interval changes to 3>5>10>15>30>60 seconds
by each press.
 ‘4 Split Screen sequencing’ is disabled in the following modes.
- 8 channel DVR: 3x3 Mode
- 16 channel DVR: 4x4 Mode
 Use only with 16 channel DVR.
 Adjust interval for ‘X9 Split Screen sequencing’.
 Check  check box next to the camera that wish to include in sequencing. Any camera with unchecked check box will be
excluded from channel sequencing.
 Adjust the rotation interval of camera by clicking Dwell column. The rotation interval changes to 3>5>10>15>30>60 seconds
by each press.
 ‘9 Split Screen sequencing’ is disabled in 4X4 Mode.
4.3.3 Spot Monitor
 Please click ( ) DISPLAY>Spot Monitor and the following screen will appear.
 This menu will allow adjust interval of channel sequencing of Spot monitor.
 Click ( ) Spot Select to choose Spot monitor to be set up.
X9 Seq
Quad Seq
Full Seq