Rugged Cams HD Megapixel User Manual

Page 3

Advertising
background image

3

Cautions


 This product has free voltages (100V and 240V). See installation instructions before connecting to the power supply.
 This product uses a Lithium battery.
 To avoid any risk of explosion, do not replace the battery on the main board by anything other than a Lithium battery.
 Dispose of used batteries according to the manufacturer’s instructions.
 This equipment and all communication wirings are intended for indoor use only.
 To reduce the risk of fire or electric shock, do not expose the unit to rain or moisture.

WEEE(Waste Electrical and Electronic Equipment)

Important Safeguards

1. Read

Instructions

 To reduce the risk of fire or electric shock, do not expose the unit to rain or moisture.

2. Retain

Instructions

 The safety and operating instructions should be retained for future reference.

3. Cleaning

 Unplug this equipment from the wall outlet before cleaning it. Do not use liquid aerosol cleaners. Use a damp soft cloth for

cleaning.

4. Attachments

 Never add any attachments and/or equipment without manufacturer approval as such additions may result in the risk of fire,

electric shock, or other personal injury.

5. Water

and/or

Moisture

 Do not use this equipment near water or in contact with water.

6. Accessories

 Do not place this equipment on an unstable cart, stand or table. The equipment may fall, causing serious injury to a child or

adult and serious damage to the equipment.

 Wall or shelf mounting should follow the manufacturer’s instructions and should use a mounting kit approved by the

manufacturer.

 Move this equipment and cart combination with care. Quick stops, excessive force and uneven surfaces may cause the

equipment and cart combination to overturn.

7. Power

Sources

 This equipment should be operated only from the type of power source indicated on the marking label. If not sure the type of

power, please consult to distributor or local power company.

8. Power

Cords

 Operator or installer must remove power, BNC, alarm and other connections before moving the equipment.

9. Lightning

 For added protection for this equipment during a lightning storm, or when it is left unattended and unused for long periods of

time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the equipment

due to lightning and power-line surges.

10. Overloading

 Do not overload wall outlets and extension cords to avoid the risk of fire or electric shock.

11. Objects and Liquids

 Never push objects of any kind through openings of this equipment as they may touch dangerous voltage points or short out

parts that could result in a fire or electric shock.

 Never spill liquid of any kind on the equipment.

Customers in European Union countries are advised to dispose this product, at the end of its

useful life, as per applicable local laws, regulations and procedures.

Advertising