Canon EOS-1D X Mark II DSLR Camera (Body Only) - Manual (Page 121)

121
3 Selecting AI Servo AF Characteristics
You can manually adjust each case’s three parameters: 1. Tracking
sensitivity, 2. Acceleration/deceleration tracking, and 3. AF point auto
switching.
1
Select a case.
Turn the < 5 > dial to select the icon
of the case you want to adjust.
2
Press the < J / K > button.
The selected parameter will be
highlighted with a purple frame.
3
Select the parameter to adjust.
Select the parameter to adjust, then
press <
0 >.
If you select [ Tracking sensitivity ] or
[ Accel./decel. tracking ], the setting
screen will appear.
4
Make the adjustment.
Adjust the setting, then press < 0 >.
X The adjustment is saved.
The default setting is indicated by the
light gray [
C ] mark.
To return to the screen in step 1,
press the <
J / K > button.
Changing Cases’ Parameter Settings
In step 2, if you press the < J / K > button, then press the < L > button,
you can revert the 1, 2, and 3 parameter settings above for each case to
their defaults.
You can also register the 1, 2, and 3 parameter settings to My Menu
(p.465). Doing so will change the selected case’s settings.
When shooting with a case whose parameters you adjusted, select the
adjusted case, then take the picture.