Canon EOS-1D X Mark II DSLR Camera (Body Only) - Manual (Page 453)

453
7 Custom Controls
If the metering timer is active, you can select an AF point directly with
the <
5 > or < 9 > dial without pressing the < S > button.
*5: With the Quick Control Dial setting screen
displayed, you can press the < B > button, then
set the direction for switching the AF point for when
the <
5 > dial is turned. The [ Direction: AF point
switching ] settings for [ Horizontal ] and [ Vertical ]
will work for Single-point Spot AF, Single-point AF,
Man. select.: AF point expansion, and Expand AF
area: Surround. The [
Direction: Zone AF frame
switch ] settings for [ Cycle through the zones ],
[ Horizontal ], and [ Vertical ] will work with Zone AF.
*6: On the Multi-controller setting screen, press the < B > button and you can select
the AF point ([ Switch to center AF point ] or [ Switch to registered AF point ]) the
camera will switches to when you press the center of < 9 >. To register the AF point,
see page 450.
If the metering timer is active, you can select an AF point directly with
<
5 > without pressing the < S > button. When this function is set, the
functions of the < O > and < S > buttons will be switched between them.
By holding down the < S > button and turning the < 6 > dial, you can
set the exposure compensation or aperture.
*7: With the setting screen displayed, you can press the < B > button, then set the
direction for switching the AF point for when the < 5 > dial is turned. The [ Direction:
AF point switching ] settings for [ Horizontal ] and [ Vertical ] will work for Single-point
Spot AF, Single-point AF, Man. select.: AF point expansion, and Expand AF area:
Surround. The [
Direction: Zone AF frame switch ] settings for [ Cycle through the
zones ], [ Horizontal ], and [ Vertical ] will work with Zone AF.
: Direct AF point selection
: Select AF point O z S ( during metering)