Canon EOS-1D X Mark II DSLR Camera (Body Only) User Manual

Page 282

Advertising
background image

3

Menu Function Settings

282

• Mode 2

When the shutter button is pressed completely, only one shot will be
taken. While you keep holding down the shutter button, the camera
operation will be suspended. Then when you return to the shutter
button’s halfway position, the camera operation will resume. The
release sound at the moment of shooting can thereby be minimized.
Even if continuous shooting is set, only a single shot will be taken.

• Disable

Be sure to set it to [

Disable

] if you use a TS-E lens (other than

those listed in below)

for shifting or tilting the lens

or if you use

an Extension Tube. If [

Mode 1

] or [

Mode 2

] is set, the standard

exposure may not be obtained, or an irregular exposure may result.

Even if drive mode is set to <

6

>, <

6o

>, or <

6p

> during Live View

shooting (p.147), these silent drive modes will not further reduce the
mechanical sound. (The only reduction of the mechanical sound is the
effect of to the Silent Live View shooting mechanism.)

Between [

Mode 1

] and [

Disable

], the internal operation alone is different

between the single drive mode and the first shot during continuous
shooting. Continuous shooting with [

Mode 1

] will have the same mechanical

sound as the [

Disable

] setting for the second and subsequent shots.

With [

Mode 2

] set, continuous shooting will not work even if the drive

mode is set to <

o

>, <

p

>, <

6o

>, or <

6p

>.

If you use flash with the flash mode set to E-TTL II/E-TTL autoflash,
shutter release will be performed by the same internal operation
mechanism as with viewfinder shooting. Therefore, shooting while
suppressing the mechanical sound will not be possible (regardless of the
[

Silent LV shoot.

] setting).

When using a non-Canon flash unit, set it to [

Disable

]. The flash will not

be fired if it is set to [

Mode 1

] or [

Mode 2

].

With H1 (equivalent to ISO 102400) or higher (ISO 32000 or higher if the
camera’s internal temperature is low), the maximum continuous shooting
speed for high-speed continuous shooting during Live View shooting will
decrease to approx. 14.0 fps. For details, see page 148.

With the TS-E17mm f/4L or TS-E24mm f/3.5L II lens, you can use [

Mode 1

]

or [

Mode 2

].

Advertising