Canon EOS-1D X Mark II DSLR Camera (Body Only) - Manual (Page 57)

57
3 Setting the Date, Time, and Zone
5
Set the daylight saving time.
Set it if necessary.
Turn the < 5 > dial to select [ Y ].
Press < 0 > so < r > is displayed.
Turn the < 5 > dial to select [ Z ], then
press < 0 >.
When the daylight saving time is set
to [
Z ], the time set in step 4 will
advance by 1 hr. If [ Y ] is set, the
daylight saving time will be canceled
and the time will go back by 1 hr.
6
Exit the setting.
Turn the < 5 > dial to select [ OK ],
then press < 0 >.
X The date/time/zone and daylight
saving time will be set and the menu
will reappear.
The date/time/zone settings may be reset when the camera is stored
without the battery, when its battery becomes exhausted, or when it is
exposed to below freezing temperatures for a prolonged period. If this
happens, set the date/time/zone again.
After changing [ Zone/Time difference ], check that the correct date/time
are set.
When using a wired LAN or wireless file transmitter to [ Sync time
between cameras ], it is recommended that you use multiple EOS-1D X
Mark II cameras. If you perform [ Sync time between cameras ] using
different models, the time zone or time may not be set correctly.
The date/time that were set will start from when you select [ OK ] in step 6.
In step 3, the time displayed in [ Time zone ] is the time difference
compared with Coordinated Universal Time (UTC).
Even if [ 5 2: Auto power off ] is set to [ 1 min. ], [ 2 min. ], or [ 4 min. ], the
auto power off time will be approx. 6 min. when the [ 5 2: Date/Time/
Zone ] setting screen is displayed.
Automatic time update is possible with GPS function (p.222).