Zoom F8n Pro 8-Input / 10-Track Multitrack Field Recorder User Manual
Operation manual
Advertising
Operation Manual
You must read the Usage and Safety Precautions before use.
©2022 ZOOM CORPORATION
Copying or reprinting this manual in part or in whole without permission is prohibited.
Product names, registered trademarks and company names in this document are the property of their respective companies. All trademarks and
registered trademarks in this document are for identification purposes only and are not intended to infringe on the copyrights of their respective owners.
Proper display is not possible on grayscale devices.
Advertising
Table of contents
Document Outline
- Notes about this Operation Manual
- Contents
- F8n Pro overview
- Recording process
- Making preparations
- Making input settings
- Input and output signal flow
- Adjusting the input signal monitoring balance
- Setting the track knob function (Track Knob Option)
- Adjusting the L/R track volume
- Monitoring the input signals of specific tracks (PFL/SOLO)
- Setting the input source (Input Source)
- Setting the monitoring sound on the PFL Screen (PFL Mode)
- Cutting low-frequency noise (HPF)
- Using the input limiter (Input Limiter)
- Inverting the input phase (Phase Invert)
- Changing the phantom power settings (Phantom)
- Changing the plugin power setting (Plugin Power)
- Delaying input signals (Input Delay)
- Converting mid-side input to ordinary stereo (Stereo Link Mode)
- Adjusting the input levels of multiple tracks simultaneously (Trim Link)
- Adjusting the side level of a mid-side mic capsule (Side Mic Level)
- Changing the automatic mixing setting (Auto Mix)
- Setting the format of Ambisonic Mode
- Setting the mic position used for ambisonic recording (Mic Position)
- Making output setting
- Setting signals sent to headphones (Headphone Routing)
- Outputting alerts through headphones (Alert Tone Level)
- Setting the headphone output Volume Curve
- Boosting headphone output to alleviate interference from recorded sound (Digital Boost)
- Disabling outputs (Output On/Off)
- Setting the standard output level (Output Level)
- Setting output levels
- Delaying output signals (Output Delay)
- Using the output limiter (Output Limiter)
- Selecting signals sent to the main outputs (MAIN OUT Routing)
- Selecting signals sent to the sub outputs (SUB OUT Routing)
- Recording
- Enabling recording on SD cards and setting file formats
- Selecting inputs and adjusting levels
- Setting the sampling rate (Sample Rate)
- Setting WAV file bit depth (WAV Bit Depth)
- Setting MP3 file bit rate (MP3 Bit Rate)
- Capturing audio before recording starts (Pre Rec)
- Maximum file size (File Max Size)
- Showing total recording times for long recordings (Time Counter)
- Moving the previously recorded take to the FALSE TAKE folder
- Using timecode
- Timecode overview
- Setting timecode functions
- Displaying the timecode setting screen
- Setting the mode
- Stopping timecode output when recording is stopped
- Synchronizing audio clock with external timecode
- Automatically enabling internal timecode when no external timecode is input
- Setting the user bits for internal timecode
- Setting the frame rate for internal timecode
- Jamming internal timecode
- Restarting internal timecode with a specified value
- Setting automatic timecode recording delay (Auto Rec Delay Time)
- Setting timecode initialization used at startup (Start Timecode)
- Using the UltraSync BLUE
- Setting the recording take
- Using the slate mic and slate tone
- Recording
- Playing recordings
- Managing files
- Using USB functions
- Exchanging data with a computer (SD Card Reader)
- Using as an audio interface
- Using the FRC-8
- Using the FRC-8 as a controller (Connect)
- Setting the type of keyboard connected to the FRC-8 (Keyboard Type)
- Setting FRC-8 fader and knob operation (Knob/Fader Mode)
- Setting user keys for the FRC-8 (User Key)
- Setting the power supply used by the FRC-8 (Power Source)
- Powering the FRC-8 with USB bus power (USB Bus Power)
- Setting the FRC-8 LED brightness (LED Brightness)
- Updating the FRC-8 firmware
- Controlling the F8n Pro from a smartphone/tablet
- Making various settings
- Setting how timecode is shown (Home Timecode Display Size)
- Setting level meter appearance (Level Meter)
- Setting the LED brightness (LED Brightness)
- Making display settings (LCD)
- Adding marks when recording/playing (PLAY Key Option)
- Setting the keys held (Key Hold Target)
- Setting the date and time (Date/Time (RTC))
- Disabling the Automatic Power Saving function (Auto Power Off)
- Setting the power supply used (Power Source)
- Backing up and loading F8n Pro settings (Backup/Load Settings)
- Restoring factory default settings
- Managing SD cards
- Managing the firmware
- About the F8n Pro Shortcut function
- Appendix