Zoom F8n Pro 8-Input / 10-Track Multitrack Field Recorder User Manual
Page 60
NOTE
:
• When set to “On (Advanced)”, the input latency of the F8n Pro increases 1 ms. When monitoring sounds
being recorded with a mic in real-time, increased latency can cause interference between sound
transmitted through the air from the source and the delayed monitored sound, possibly making accurate
monitoring of the sounds difficult.
• When setting to any value other than “Off”, the Sample Rate cannot be set to 192 kHz. Moreover, when
the Sample Rate is set to 192 kHz, any value other than “Off” setting cannot be selected.
HINT:
• Limiter operation is linked for tracks that have stereo link or MS stereo link enabled. If the signal for
either linked channel reaches the threshold, the limiter will operate on both tracks.
• When the limiter is operating, the right-most segment of the level meter and the mixer limiter indicator
on the display light yellow.
60