Zoom F8n Pro 8-Input / 10-Track Multitrack Field Recorder - Manual (Page 124)

4.
Use to select the sampling rate, and press .
Setting Explanation
44.1 kHz, 48 kHz, 88.2 kHz,
96 kHz, 192 kHz
These are standard sampling rates.
47.952 kHz
Select this when recording video at 23.976 frames per second if you
want to edit at 24 frames per second later.
48.048 kHz
Select this when recording video at 24 frames per second if you want
to edit at NTSC 29.97 or 23.98 HD later.
47.952 kHz(F), 48.048 kHz(F) These function the same as the two above, but the
<FILE_SAMPLE_RATE> sampling rate metadata will be recorded as 48
kHz.
This enables playback and editing with devices and software that do
not support 47.952 kHz and 48.048 kHz WAV files. Playback, however,
will occur at the ±0.1 % speed at which the file was recorded.
NOTE :
• When the recording file format is MP3, only 44.1 kHz and 48 kHz can be selected.
• When 192 kHz is selected, L/R tracks will not be recorded. “Input Delay”
(→ Delaying input signals (Input
Delay) ) and “Output Delay” (→ Delaying output signals (Output Delay) ) are also disabled. Moreover, “Auto
Mix” (→ Changing the automatic mixing setting (Auto Mix) ), “Ambisonic Mode” (→ Setting the format of
Ambisonic Mode ), and “Input Limiter” (→ Using the input limiter (Input Limiter) ) cannot be set.
• “Audio Interface with Rec” cannot be used when values other than 44.1 kHz or 48 kHz are selected.
(→ Using SD card recording and audio interface functions at the same time (Audio Interface with Rec)
124