Zoom F8n Pro 8-Input / 10-Track Multitrack Field Recorder - Manual (Page 122)

Adjusting input levels
1.
Use to select a track, and press .
2.
Use to adjust the input level, and press .
NOTE :
When a mic capsule is connected, the input levels of Input 1/2 cannot be adjusted with the F8n Pro. Use the
level control on the mic capsule to adjust its input volume.
HINT:
• This can be set in a range from +10 to +75 dB when the input source is set to “Mic”, from –10 to +55 dB
when set to “Line”, and from –35 to +30 dB when set to “USB”. (→ Setting the input source (Input Source) )
• If the sound distorts even when you lower the input level, try changing mic positions and adjusting the
output levels of connected devices.
• Using the limiter (→ Using the input limiter (Input Limiter) )
• Using the high pass filter (→ Cutting low-frequency noise (HPF) )
122