Honeywell INTELLIKNIGHT 5820XL - Manual (Page 110)

IntelliKnight 5820XL Installation Manual
6-8 151209
6.2.3 Zone Event Mapping
There are 11 types of events that can occur in zones (see below). For each event
type, you can activate up to 8 output groups and patterns. If it is necessary to map to
more than 8 output groups, an output group template may be used (see Section 7.5.5
for information on output group templates).
Event types are:
• Manual Pull Alarm
• Water Flow Alarm
• Detector Alarm (heat or smoke detectors)
• Aux 1 and Aux 2 Alarm (user-specified alarm types)
• Pre-alarm
• Supervisory
• Trouble
• Status Point
• CO Alarm
• CO Supervisory
Figure 6-4 Example of Zone Events Mapped to Output Groups and Patterns