Honeywell INTELLIKNIGHT 5820XL - Manual (Page 56)

IntelliKnight 5820XL Installation Manual
4-16 151209
4.6 5815XL Installation
The 5815XL SLC expander lets you add 127 SD addressable devices or 99 SK
detectors and 99 SK modules. Add up to three 5815XLs to a system to achieve the
maximum number of devices on the system.
To install the 5815XL:
1. Make sure power is off at the panel.
2. Mount the 5815XL in the 5820XL cabinet, the 5895XL cabinet, or the 5815RMK
remote mounting kit. Use the standoffs located under the control panel board
assembly and secure with screws provided with the 5815XL. For additional infor-
mation, also see Model 5895XL Installation Instructions (P/N 151142) or
5815RMK Remote Mounting Kit Installation Instructions (P/N 151391).
3. Connect the 5815XL to the control panel. (See Section 4.6.1.)
4. Use on-board DIP switches to select an SBUS ID#. (See Section 4.10.1.)
5. The new 5815XL module must be added to the system through programming.
JumpStart will add the module automatically (see Section 6.1). You can also add it
manually (see Section 7.3.2). Select a name, if desired (see Section 7.3.1.1).
6. You are now ready to connect SLC devices to the 5815XL (see Section 5.4).
Figure 4-15 is a drawing of the 5815XL board, showing the location of terminals and
DIP switches.
Figure 4-15 5815XL Board