Honeywell INTELLIKNIGHT 5820XL - Manual (Page 176)

IntelliKnight 5820XL Installation Manual
8-2 151209
8.2.1 LCD Displays
The control panel LCD displays system messages, annunciates alarms,
supervisories and troubles; provides status information; and prompts for input. These
messages can be up to 80 characters, displaying over four lines of 20 characters
each. Annunciator keys beep when they are pressed.
8.2.2 Banner
The banner is the message that displays on the control panel when the system is in
normal mode (no alarm or trouble condition exists and menus are not in use). You
can create a customized message that will display instead of the internal (default)
message. See Section 7.7.7 for information on customizing the banner.
Figure 8-2 Banner Display Examples
8.3 Key Operation
The key on the control panel board assembly is for accessing the Main Menu. The
key is activated when it is turned once to the right (clockwise). If the key has been
used to activate the menu, it must be turned counter-clockwise to exit the menu.
Figure 8-3 Using a Key to Access the Main Menu