Honeywell INTELLIKNIGHT 5820XL - Manual (Page 21)

151209 2-1
Section 2
Agency Listings, Approvals, and Requirements
2.1 Federal Communications Commission (FCC)
1. The following information must be provided to the telephone company before the
IntelliKnight 5820XL can be connected to the phone lines:
This equipment complies with Part 68 of the FCC rules and the requirements adopted
by ACTA. On the inside cover of this equipment is a label that contains, among other
information, a product identifier. If requested, this information must be provided to the
telephone company.
A plug and jack used to connect this equipment to the premises wiring and telephone
network must comply with the applicable FCC Part 68 rules and requirements
adopted by the ACTA. A compliant telephone cord (not provided) and modular jack
must be utilized with this product. It is designed to be used with a modular jack that is
also compliant.
The REN (ringer equivalence number) provided on this installation sheet is used to
determine the number of devices that may be connected to the public switched
telephone network. This number must not exceed 5.0. Since this product has an REN
of .8, the number of devices is limited. The REN number is embedded in the FCC
registration number as 10B.
If the 5820XL causes harm to the telephone network, the telephone company will
notify you in advance that the temporarily discontinuance of service may be required.
But if advance notice is not practical, the telephone company will notify the customer
as soon as possible. Also, you will be advised of your right to file a complaint with the
FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations or
procedures that could affect the operation of the equipment. If this happens the
telephone company will provide advance notice in order for you to make necessary
modifications to maintain uninterrupted service.
If trouble is experienced with the 5820XL, for repair or warranty information, please
contact Silent Knight at 1-800-328-0103 or www.silentknight.com. If the equipment is
causing harm to the telephone network, the telephone company may request that you
A Manufacturer: Silent Knight by Honeywell
B Model Number: IntelliKnight 5820XL
C FCC registration number: AC6USA-23901-AL-E
Ringer equivalence: 0.8B
D Type of jack: RJ31X
E Facility Interface Codes: Loop Start: 02LS2
F Service Order Code: 9.0F