Honeywell INTELLIKNIGHT 5820XL - Manual (Page 77)

Control Panel Installation
151209 4-37
4.12.3.2 Installing 2-Wire Class A Smoke Detectors
To install a Class A two-wire smoke detector, wire as shown in Figure 4-35.
Figure 4-35 Two-Wire Class A Smoke Detector Connections
Note: In programming any point that uses multiple Flexput circuits, the lowest Flexput circuit number is
used to refer to the circuit pair. For example, Figure 4-35 uses both Flexput circuit 5 and 6, so in
programming it would be referred to as point 5.
Note:
Flexput circuit 5 and 6
used as an example.
Any Flexput point pairing
could be used.
Supervised
Power Limited