Honeywell INTELLIKNIGHT 5820XL - Manual (Page 130)

IntelliKnight 5820XL Installation Manual
7-4 151209
if desired.
You must save changes when you exit the Program Menu or the new module will not
be added.
Note: If you Add a Module that has not been physically connected, the panel will go into trouble after it
reinitializes (when you exit the Program Menu). When the new module is attached, the trouble will
correct itself automatically the next time you power up the system.
7.3.3 Deleting a Module
If you ever need to delete a module, follow these steps.
You must be in the Main Menu to perform this task. If necessary, enter the Installer
Code.
1. Enter the installer code.
2. Press
or
to display the main menu.
3. Select for Program Menu.
4. Press to enter module menu.
5. Press to delete a module.
6. A warning screen will display. If you want to proceed with deleting the module,
select Yes. To cancel, select No.
ENTER
ACK