2 setting the 5815xl wiring class, 2 adding a module, 2 setting the 5815xl wiring class -3 – Honeywell INTELLIKNIGHT 5820XL User Manual
Page 129: 2 adding a module -3, Ually (see section 7.3.2). select a nam, Manually (see section 7.3.2)
Programming
151209
7-3
7. If you wish to edit the modules name press the
or
arrow to select each
character for the modules name (or press
to bypass name edit).
Press the
to move to the next character.
Figure 7-1 Edit module Name Programming Screen Example
7.3.1.2 Setting the 5815XL Wiring Class
8. Choose the class of wiring you wish to use for this module by pressing the
or
arrow, then press
.
7.3.2
Adding a Module
If you need to add a new hardware module to the system, follow these steps.
You must be in the Main Menu to perform this task. If necessary, enter the Installer
Code.
1. Enter the installer code.
2. Press
or
to display the main menu.
3. Select
for Program Menu.
4. Press
to enter module menu.
5. Press
to add a module.
6. From the next screen, select the number that corresponds to the type of module
you are adding from the <New Module Type> screen.
The screen will display “Adding module [#]...” for a few moments. You will be
returned to the <New Module Type> screen where you can select another module
ENTER
ACK
ENTER
ACK