4 disable / enable a zone, 5 disable / enable a point – Honeywell INTELLIKNIGHT 5820XL User Manual
Page 179
System Operation
151209
8-5
8.5.4
Disable / Enable a Zone
1. From the Main Menu, select
for Point Functions.
2. Select
for Disable/Enable Point.
3. Select
to Disable Zone Points or
to Enable Zone Points.
4. Use the
or
arrow key to select the Zone and press
.
8.5.5
Disable / Enable a Point
1. From the Main Menu, select
for Point Functions.
2. Select
for Disable/Enable Point.
3. Select
for Disable/Enable Pt.
4. Use
and
to move through the list. Press
to select the module where
the point you want to disable/enable is located. A description of the point should
display. The fourth line of the screen should show “NORMAL” (meaning that the
point is currently enabled) or “DISABLED” (the point is currently disabled). Press
to toggle between NORMAL and DISABLE.
ENTER
ACK
ENTER
ACK