Honeywell INTELLIKNIGHT 5820XL - Manual (Page 185)

System Operation
151209 8-11
special characters. Characters begin displaying after “9”.
4. You will be prompted to enter an account number. If the account number you want
to use is already displayed, just press to begin communication.
If the account number displayed is not the correct one, enter the account number
and press to begin communication.
5. The panel will attempt to communicate with the computer. If communication was
established, the upload task you created will be placed in the SKSS 5660 job
queue, awaiting processing. When processing is completed, an “Unsolicited
Upload” task will appear in the queue.
8.5.19 Working with a Printer
If you are using the Model 5824 serial/parallel interface module, several printing
options are available. See Section 4.7 for information about installing the 5824.
1. From the Main Menu, select Printer Options.
2. From the next screen, select the 5824 module where the printer is connected.
3. If the printer is not currently busy printing another report, a screen with the follow-
ing options will be available. If the printer is busy, a message will display. You can
press to cancel the current print job. These options will then display.
= Event Logging
Enables event logging, which causes the printer to continuously print events as they
occur. The date/time will print in 24-hour military format. Once event logging is enabled,
it will remain enabled until canceled by the installer. If you need to disable event
logging, return to this option and press to disable.
Sample Event Log
= Print Event
History
Prints the up-to-1000 events currently stored in the panel’s event history buffer. Events
print starting with the newest. The date and time printed will be when the event actually
occurred and will print in 24-hour military format.
Sample Event
History Print-Out
ENTER
ACK
ENTER
ACK
EVENT LOG:
EVENT LOG:
STARTED: 02/17/97 02:23
STOPPED: 02/17/97 15:02
02/17/97 11:23 Event: System Silenced
02/17/97 11:24 Event: System Reset
02/17/97 14:30 Event: Local Programming Begin
02/17/97 15:01 Event: Local Programming Ended Successfully
EVENT HISTORY: PRINTED: 02/28/97 13:35
02/20/97 09:05 Event 2 of 10: System Reset
02/28/97 13:31 Event 2 of 10: Walk Test End
02/20/97 09:02 Event 3 of 10: System Silenced
02/22/97 08:47 Event 4 of 10: Printer Off Line 4
02/22/97 08:52 Event 4 of 10: Printer On Line 4
02/25/97 15:54 Event 5 of 10: Local Programming Begin
02/25/97 16:10 Event 5 of 10: Local Programming Ended Successfully
02/28/97 12:50 Event 6 of 10: Walk Test Begin
.
.
.