Honeywell INTELLIKNIGHT 5820XL - Manual (Page 154)

IntelliKnight 5820XL Installation Manual
7-28 151209
To edit a point name:
1. Do steps 1 through 4 in Section 7.6.3.
2. Using the or arrow, select the module of the point you want to edit, press
.
3. Enter the point number.
4. Press until the module name is blinking.
5. Press .
A screen similar to the one shown in Figure 7-2 displays.
Figure 7-11 Selecting Character for Zone Name
6. Select the characters for the point name by pressing the or arrow until the
desired character is shown then press .
OR
Enter the Numerical Designator for the character you want, then press . See
Appendix B for a list of available characters and their numeric designators.
7. Repeat step 6 until the name is complete.
8. Press when the name is complete.
ENTER
ACK
ENTER
ACK
ENTER
ACK