Using the split 1 set of ribbon panels option – FARGO electronic DTC300 User Manual

Page 153

Advertising
background image

RESTRICTED USE ONLY

Fargo Electronics, Inc.

DTC400/DTC300/DTC300M Card Printer Service Manual (Rev. 1.3)

6-24

Using the Split 1 Set of Ribbon Panels option

Use this option to provide the most economical means of printing a dual-sided card since a
single set of Ribbon Panels will be split to print both the front and backsides of a card.

Step Procedure

1

Select this option to automatically print full-color on the front of a card and resin
black on the back of a card (using either of the Full-color YMCK or YMCKK Print
Ribbons).

•

If using the YMCKO Ribbon type, the front of the card is printed with the
Ribbon's YMC Panels and the back is printed with the K Panel, and the O
Panel is printed on the front.

•

If using the YMCKOK Ribbon type, the front of the card is printed with the
YMCK Panels and the back is printed with the second K Panel.

(Note #1: This option is automatically enabled when the YMCKOK Ribbon type
is selected.)

Advertising