Sensor replacement – FARGO electronic DTC300 User Manual

Page 331

Advertising
background image

RESTRICTED USE ONLY

Fargo Electronics, Inc.

DTC400/DTC300/DTC300M Card Printer Service Manual (Rev. 1.3)

8-77

Sensor Replacement

Replacing the Ribbon LED Sensor Assembly (A000374 and
D900138)

Refer to Drawings D900078.

Tools Needed: Phillips Head Screwdriver.

Estimated Repair Time: 5 minutes.

Steps Procedure

1

Caution: Turn off the Printer and unplug the power cord from the

Printer.

2

Remove the Rear Cover. See

Replacing the Rear Cover (D900066)

.

3

Remove the Input Door and Right End Cap. See

Replacing the Input Door

Assembly (D900148)

. See

Replacing the Right End Cap (D900065-01 and –02)

.

4

Remove the Card Output Door and Left End Cap. See

Replacing the Output

Door Assembly (D900092)

. See

Replacing the Left End Cap (D900064)

.

5

Remove the Top Cover Assembly. See

Replacing the Top Cover Assembly (see

page 8-39)

.

6

Remove the Platen Roller. See

Replacing the Platen Roller (D900041)

.

Continued on the next page

Advertising