FARGO electronic DTC300 - Manual (Page 46)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400/DTC300/DTC300M Card Printer Service Manual (Rev. 1.3) 4-14
Flipper Table Module Installation
Additional, related links are provided below:
• See the Flipper Table Module Assembly Problems procedures.
• See the Print Both Sides option in the Using the Device Options tab (DTC400/DTC300)
section.
• See the Front and Back radio buttons in the Using the Overlay / Print Area tab
(DTC400/DTC300/DTC300M) section.
• See the Front and Back radio buttons in the Using the K Panel Resin tab
(DTC400/DTC300) section.
Installing the Flipper Table Module Assembly (D900200)
Step Description
1
Caution: Turn off the Printer and unplug the power cord from the
Printer.
2 Remove the Rear Cover (D90066) to the Printer.