FARGO electronic DTC300 - Manual (Page 30)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400/DTC300/DTC300M Card Printer Service Manual (Rev. 1.3) 2-15
Printer Module: Flipper Table Module Assembly (D900200)
The Flipper Table Module Assembly (D900200) is an automated Flipping Module that
allows the Printer to print on the frontside and backside of each card.
Display: Flipper Table Module Assembly
Here are references within this document.
• See the Installing the Flipper Table Module Assembly (D900200) procedure.
• See the Flipper Table Module Assembly Problems procedures.
• See the Print Both Sides option in the Using the Device Options tab
(DTC400/DTC300) section.
• See the Front and Back radio buttons in the Using the Overlay / Print Area tab
(DTC400/DTC300/DTC300M) section.
• See the Front and Back radio buttons in the Using the K Panel Resin tab
(DTC400/DTC300) section.
• See the DTC400/DTC300/DTC300M Card Printer Service Manual for the replacement
procedures for this Printer.