FARGO electronic DTC300 - Manual (Page 168)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400/DTC300/DTC300M Card Printer Service Manual (Rev. 1.3) 6-39
Using the Rotate Front 180 Degrees or Rotate Back 180 Degrees
options
Use this option to change the position of the printed image in relation to the set location of a
card's Magnetic Stripe or smart chip.
Step Procedure
1 Select the Rotate Front 180 Degrees option to rotate the image on the front of
the card by 180 degrees when printed.
OR
Select the Rotate Back 180 Degrees option to rotate the image on the back of
the card by 180 degrees when printed.