FARGO electronic DTC300 User Manual
Page 56
Advertising
RESTRICTED USE ONLY
Fargo Electronics, Inc.
DTC400/DTC300/DTC300M Card Printer Service Manual (Rev. 1.3)
4-24
Installing the Card Flipper Module Upgrade Kit (continued)
Step Procedure
12
Open the Card Flipper Module Cover’s top lid and attach its upper latch hooks to
the Printer’s top cover. Next pivot the Cover down into its final position.
Step Procedure
13
Secure the Card Flipper Cover by re-installing the two Phillips screws that were
removed in Step 6. After the Cover is secure, re-attach the Card Hopper.
Advertising