FARGO electronic DTC300 - Manual (Page 394)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400/DTC300/DTC300M Card Printer Service Manual (Rev. 1.3) 11-25
Selecting the Card Samples tab in the Diagnostics Utility
Step Procedure
1 a. Select the Card Samples tab to print sample images from the Printer.
b. Select the desired Image, as shown below. (Note: You will see the
enlarged Image after you select it from several options.)
c. Check the settings defined in your Driver before printing your selection.
d. Click on the Print button when you are ready, as shown below. (Note: The
default Card Size is CR-80, as shown below.)