FARGO electronic DTC300 - Manual (Page 21)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400/DTC300/DTC300M Card Printer Service Manual (Rev. 1.3) 2-6
Visual Security Solutions (Specifications)
VeriMarkTM Cards - 2-D holographic foil application
VeriMarkTM Cards are a low cost, customized 2-D holographic foil application, that is made
in two steps.
• The first step is to emboss a base foil 1.9 cm (L) x 1.3 cm (H) onto the surface of a
blank white card.
• The second step is debossing a custom made dye into the surface of the base foil -
leaving a customized image, logo or text provided by the customer.
• Two separate color foils are used to contrast the impression.
End Users will be able to choose between 8 different card placements (4 - landscape) and
(4-portrait) where the VeriMarkTM can be located. When its time to print through the Driver,
the End User will select the location on their organizations card design around which no
printing and overlay will be placed.
Custom HoloMarkTM Cards
A Custom HoloMark TM Card is a three-dimensional holographic image transferred to
metal foil and embossed to blank cards. The image is customer specific and the program
mirrors our holographic laminates program with a couple exceptions.
Visual Security - Card Stock Part Numbers
All Visual Security Cards will be offered on the following Fargo Card Stocks only:
• P/NNo. 81754 Ultra Card
• P/NNo. 81762 Ultra Card III with hi-coercivity magnetic stripe
• P/NNo. 81763 Ultra Card III
Visual Security - Fargo Certified Overlaminates (Special Order in
50 quantity minimum)
• Part No. 82255: PolyGuard 1.0 mil for HoloMarkTM and VeriMarkTM Cards, Clear
• Part No. 82256: PolyGuard 1.0 mil for HoloMarkTM and VeriMarkTM Cards, High
Resolution Globe design hologram with "Secure" micro-text
Visual Security Card Stock - Tolerances
• Tolerance of base foil placement will equal +/- .010" from the nearest edges of the card
• Tolerance of layered foil will equal +/- .010"