FARGO electronic DTC300 - Manual (Page 280)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400/DTC300/DTC300M Card Printer Service Manual (Rev. 1.3) 8-26
Replacing the Left End Cap (D900092)
Steps Procedure
2 a. Grasp the Output Door Assembly (D900092) by the sides with your thumb
and forefinger. Compress the sides of the door by squeezing your fingers
together and then gently pull it out.
b. Use a No. 2 Phillips screwdriver to remove the following:
• The two (2) screws (130984) that secure the Left End Cap (D900064-01,
DTC400; 900064-02, DTC300) to the main assembly.
3 Replace the Left End Cap (D900092) to the main assembly.
Continued on the next page