FARGO electronic DTC300 - Manual (Page 276)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400/DTC300/DTC300M Card Printer Service Manual (Rev. 1.3) 8-22
Reviewing the Main Print Board Connections
Main Print Board (A000297) Location
RFID Antenna Assembly (A000365) Cable (D900112) J5
Stepper Motor Assembly (D900087) Cable (D900032); 4 pin/4 wire
Connector. J3
DC Motor’s Card Feed, Rewind Motor, Headlift and Ribbon Drive Cable
(D900031); 6-pin/6-wire Connector. J20
Main Power from Power/USB Board (A000368) Cable (D900034) J7
Printhead Assembly (D900023) Cable (D900035) J16
Color Sensor Board Assembly (A000375) Cable (D900080); 2-pin/2-wire
Connector. J23
LED Board Assembly (A000374) Cable (D900114); 3-pin/3-wire Connector. J22
Headlift Sensor Assembly (D900113); 4-pin/4-wire Connector. J9
Encoder and Card Sensor Assembly (D900036); 12-pin/12-wire Connector. J4
Fan Assembly (D900033) J15
Reviewing the Power/USB Board Connections
Power Board (A000368) Location
Main Board Power J3