FARGO electronic DTC300 User Manual
Page 253
Advertising
RESTRICTED USE ONLY
Fargo Electronics, Inc.
DTC400/DTC300/DTC300M Card Printer Service Manual (Rev. 1.3)
7-7
Cleaning the Platen and the Card Feed Rollers (continued)
Step Procedure
4
Insert the Cleaning Card into the Single Feed Card Slot until the card stops.
(Note: If your Printer is equipped with a Magnetic Encoder, you must insert the
Cleaning Card with the printed side up and with the small Liner Strip towards
the front of the Printer.)
Advertising