FARGO electronic DTC300 User Manual
Page 52
Advertising
RESTRICTED USE ONLY
Fargo Electronics, Inc.
DTC400/DTC300/DTC300M Card Printer Service Manual (Rev. 1.3)
4-20
Installing the Card Flipper Module Upgrade Kit (continued)
Step Procedure
5
Pivot the lower end of the Output Cover in an outward motion to remove the
Output Cover.
Step Procedure
6
Use a No. 2 Phillips screwdriver to remove the Card Flipper Module Cover.
(Note: Save these screws for later use in this procedure.)
Advertising