FARGO electronic DTC300 - Manual (Page 87)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400/DTC300/DTC300M Card Printer Service Manual (Rev. 1.3) 5-14
Resolving the Mag Verify Error
All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
Step Procedure
1 Review the following information.
• Symptom: The Printer is unable to verify encoded data.
• Printer Error State: The Printer is unable to verify encoded data.
• LCD Error Display: Mag Verify
• Driver Monitor Error Display: Mag Verify