FARGO electronic DTC300 User Manual
Page 284
RESTRICTED USE ONLY
Fargo Electronics, Inc.
DTC400/DTC300/DTC300M Card Printer Service Manual (Rev. 1.3)
8-30
Replacing the Input Door Assembly (D900148)
Refer to Drawings D900148.
Tools Needed: None.
Parts Needed: Input Door D900148
Estimated Repair Time: 5 minutes.
Steps Procedure
1
Caution: Turn off the Printer and unplug the power cord from the
Printer.
2
a. Grasp the Input Door Assembly (D900148) by the sides with your thumb and
forefinger.
b. Compress the sides of the door by squeezing your fingers together and then
gently pull the door of the Input Cover.
(Note: The Input Door is composed of a durable polycarbonate material and is
able to withstand extreme flexibility before breaking.)
3
Replace the Input Door Assembly (D900148). See previous display as needed.