FARGO electronic DTC300 - Manual (Page 296)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400/DTC300/DTC300M Card Printer Service Manual (Rev. 1.3) 8-42
Replacing the Front Cover (D900072-03 DTC300M, D900072-02
DTC300, D900072-01 DTC400)
Refer to Drawing D900190.
Tools Needed: Phillips Head Screwdriver.
Parts Needed:
• Front Cover DTC300 M D900072-03
• Front Cover DTC300 D900072-02
• Front Cover DTC400 D900072-01
Estimated Repair Time: 5 minutes.
Steps Procedure
1
Caution: Turn off the Printer and unplug the power cord from the
Printer.
2 a. Push open the Cover.
b. Gently apply force to the middle of the Cover to flex the Tabs out of their
locating holes in the Frontside Plate.
3 Remove and replace the Front Cover.
Continued on the next page