FARGO electronic DTC300 - Manual (Page 291)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400/DTC300/DTC300M Card Printer Service Manual (Rev. 1.3) 8-37
Replacing the Magnetic Module Door (D900107)
Refer to Drawings D900148.
Tools Needed: Phillips Head Screwdriver.
Parts Needed: Magnetic Module Door D900107
Estimated Repair Time: 5 minutes.
Steps Procedure
1
Caution: Turn off the Printer and unplug the power cord from the
Printer.
2 Use a No. 2 Phillips screwdriver to remove the one (1) screw (180948) to the
Magnetic Door (D9000107).
3 Replace the Magnetic Door (D9000107).
Continued on the next page