FARGO electronic DTC300 - Manual (Page 71)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400/DTC300/DTC300M Card Printer Service Manual (Rev. 1.3) 4-39
Printing a Test Print Image
Step Procedure
1 a. From your computer’s startup menu, select Settings > Printers and Faxes
(Windows XP) or > Printers (Windows 98SE, Me and 2000).
b. Double click on the DTC400/DTC300/DTC300M Card Printer under the
Printers window.
c. Select Printing Preferences under the Printer drop-down menu. This will bring
up the DTC400/DTC300/DTC300M Printing Preferences window.
2 a. Select the Card tab, and then click on the Test Print button, as shown in
Display A in this section. (Note: Ensure that the Ribbon is installed before
proceeding. The correct Ribbon type is selected in the Device Options
tab.)
b. When the Test Print button is selected, an image is copied to the Printer.
Display A - DTC400/DTC300/DTC300M Printer Driver Card Tab: