Laser safety statement – Samsung CLX-3175FN User Manual

Page 104

Advertising
background image

7

_Safety information

LASER SAFETY STATEMENT

The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR, chapter 1 Subchapter J for Class I(1) laser products, and

elsewhere is certified as a Class I laser product conforming to the requirements of IEC 825.
Class I laser products are not considered to be hazardous. The laser system and printer are designed so there is never any human access to

laser radiation above a Class I level during normal operation, user maintenance or prescribed service condition.

WARNING

Never operate or service the printer with the protective cover removed from Laser/Scanner assembly. The reflected beam, although invisible,

can damage your eyes.
When using this product, these basic safety precautions should always be followed to reduce risk of fire, electric shock, and injury to persons:

13.

Unplug the machine from the telephone jack, PC and AC wall outlet and refer servicing to qualified service personnel under the

following conditions:

When any part of the power cord, plug or connecting cable is damaged or frayed.

If liquid has been spilled into the machine.

If the machine has been exposed to rain or water.

If the machine does not operate properly after instructions have been followed.

If the machine has been dropped, or the cabinet appears damaged.

If the machine exhibits a sudden and distinct change in performance.

14.

Adjust only those controls covered by the operating instructions. Improper adjustment of other controls may result in damage, and

may require extensive work by a qualified service technician to restore the machine to normal operation.

15.

Avoid using this machine during a lightning storm. There may be a remote risk of electric shock from lightning. If possible, unplug the

AC power and telephone cord for the duration of the lightning storm.

16.

The Power cord supplied with your machine should be used for safe operation. If you are using a cord which is longer than 2 m with
110 V machine, then it should be 16 AWG

a

or bigger.

17.

Use only No.26 AWG or larger telephone line cord.

18.

SAVE THESE INSTRUCTIONS

19.

This machine can be operated only in the country you have purchased. (Due to different voltage, telecommunication configuration

and etc.)

a. AWG: American Wire Gauge

Advertising
This manual is related to the following products: