Removing printer software, Installing mono printer driver – Samsung CLX-3175FN User Manual
Installing Printer Software in Windows
Removing Printer Software
From the Start menu select Programs or All Programs
→ your printer driver name → Maintenance.
Select Remove and click Next.
You will see a component list so that you can remove any
Select the components you want to remove and then click
When your computer asks you to confirm your selection,
The selected driver and all of its components are removed
from your computer.
After the software is removed, click Finish.
Installing mono printer driver
This printer provides you the printer drivers with a mono driver
so you can use your printer as a monochrome printer. You must
install the mono driver on your computer. Following steps guide
you through the step by step installation process.
Make sure that the printer is connected to your computer
and powered on. Or your computer and printer are
connected to the network.
Insert the supplied CD-ROM into your CD-ROM drive. The
CD-ROM should automatically run, and an installation
If the confirmation window appears, click Finish.
Click Start → Printers and Faxes.
Select Add Printer.
When Add Printer Wizard appears, click Next.
Select Local printer attached to this computer, and
Automatically detect and install my Plug and Play
printer, then click Next. Go to step 13.
If your computer does not find the printer, then follow the
Select Next in the Select a Printer Port window.
In the Select a Printer Port window, select Have Disk....
Click Browse to find a mono driver for your printer.
Select ***.inf file and click Open.
Click OK in the Install From Disk window.
Select a mono driver in the Printers field, and click Next.
: If you have installed a mono driver before, then the
Use Existing Driver window. Select as the window explains,
and click Next. Also, depending on your computer
configuration, the printer sharing window or the print the test
page window may appear; make the appropriate selection.
Enter your printer name, and click Next.
Click Finish to start installing a mono printer driver.
: If your printer is connected to a network, go to
printer's Properties and select the Ports tab, then click Add
Portand Standard TCP/IP Port, and create a new port to
connect to the printer. To create a new port, follow the
procedure laid out in the wizard window.