Samsung CLX-3175FN User Manual

Page 42

background image

42 _

Loading originals and print media


Slide the tray 1 back into the machine



After loading paper, set the paper type and size for the tray. See "Setting
the paper size and type" on page 43.

The tray is preset to Letter or A4 size, depending on your country. To
change the size to A4 or Letter, you must adjust the lever and paper width

guide properly.


Pull the tray out of the machine. Open the paper cover and remove
paper from the tray if necessary.


If you want to change the size to Letter, hold the lever at the back of the
tray, and rotate the lever clockwise.


Squeeze the paper width guide and slide it to the edge of the lever.

Due to insufficient paper in the tray, the paper length guide can be

pushed to inside, load enough paper.

If you experience problems with paper feed, load a paper into the

tray one by one.

You can load previously printed paper. The printed side should be

facing up with an uncurled edge at the front. If you experience

problems with paper feed, turn the paper around. Note that print

quality is not guaranteed.

If you want to change the size to A4, first move the paper width guide

to left and rotate the lever counterclockwise. If you force the lever, it

could damage the tray.

This manual is related to the following products: