Printing on special print materials, Feeding the print material manually, Setting the paper size and type – Samsung CLX-3175FN User Manual
Loading originals and print media
PRINTING ON SPECIAL PRINT MATERIALS
The machine can hold special sizes and types of print material, such as
postcards, note cards, and envelopes. Especially, it is useful for single page
printing on letterhead or colored paper.
Feeding the print material manually
Load only one size of print media at a time in the tray.
To prevent paper jams, do not add paper when there is still paper in the
tray. This also applies to other types of print media.
Print media should be loaded face up with the side you want to print, and
the top edge going into the tray first. Place print materials in the center of
Always load only the specified print media to avoid paper jams and print
quality problems. (See "Selecting print media" on page 28.)
Flatten any curl on postcards, envelopes, and labels before loading
them into the tray.
When you print in application, start the print menu.
Before you print, open printer properties.
Press the Paper tab in printer properties, and select an appropriate
Select Manual Feeder in paper source, then press OK.
Start printing in application.
Press the Color Start or Black Start button on the machine to start
feeding, then the machine starts printing.
SETTING THE PAPER SIZE AND TYPE
After loading paper in the paper tray, you need to set the paper size and
type using the control panel buttons. These settings will apply to Copy
mode. For PC-printing, you need to select the paper size and type in the
application program you use on your PC.
Press Menu, and then OK.
Press the left/right arrow until System Setup appears and press OK
Press the left/right arrow until Paper Setup appears and press OK.
Press OK when Paper Size appears.
Press the left/right arrow until the paper size you are using appears and
Press the left/right arrow until Paper Type appears and press OK.
Press the left/right arrow until the paper type you are using appears and
Press Stop/Clear to return to ready mode.
Depending on the media type you are using, keep the following
Envelopes: Flap side down and with the stamp area on the top left
Labels: Print side up and top short edge entering the machine
Preprinted paper: Design side up with the top edge toward the
Card stock: Print side up and the short edge entering the machine
Previously printed paper: Previously printed side down with an
uncurled edge toward the machine.
If you want to use a label, set the paper type to Label.
If you are printing multiple pages, load the next sheet after first
page prints out, and press the Color Start or Black Start button.
Repeat this step for every page to be printed.
The settings you change remain in effect only while you are using
the current application.
If you want to use special sized paper such as billing paper, select
in the Paper tab in the printer properties. See Software