Roller misfeed, Clearing paper jams, In the tray 1 – Samsung CLX-3175FN User Manual

Page 73: In the fuser unit area

Advertising
background image

Troubleshooting_ 73

Roller misfeed

1.

Open the scanner lid.

2.

Seize the misfeed paper, and remove the paper from the feed area by

carefully pulling it to the right using both hands.

3.

Close the scanner lid. Then load the removed pages back into the ADF.

CLEARING PAPER JAMS

When a paper jam occurs, the warning message appears on the display

screen. Refer to the table below to locate and clear the paper jam.

In the tray 1

1.

Open and close the front cover. The jammed paper is automatically

ejected from the machine.
If the paper does not exit, go to the next step.

2.

Pull the tray 1 out of the machine.

3.

Remove the jammed paper by gently pulling it straight out.

If the paper does not move when you pull, or if you do not see the paper

in this area, check the paper exit area. (See "In the paper exit area" on

page 74.)

4.

Insert the tray 1 into the machine until it snaps into place. Printing

automatically resumes.

In the fuser unit area

If paper is jammed in the fuser unit area, follow the next steps to release the

jammed paper.
1.

Open the scan unit.

MESSAGE

LOCATION OF JAM

GO TO

Paper Jam 0
Open/Close Door

In the paper feed area

and inside the machine

See "In the tray 1" on

page 73, "In the fuser

unit area" on page 73.

Paper Jam 1
Check Inside

Inside the machine

See "In the tray 1" on

page 73, "In the fuser

unit area" on page 73.

Paper Jam 2
Check Inside

Inside the machine and

in the fuser area

See "In the tray 1" on

page 73, "In the fuser

unit area" on page 73.

Some messages may not appear in the display depending on options

or models.

To avoid tearing the paper, pull the jammed paper out gently and

slowly. Follow the instructions in the following sections to clear the

jam.

Advertising
This manual is related to the following products: