Samsung CLX-3175FN User Manual

Page 153

Advertising
background image

Troubleshooting_ 56

Paper Jam 2
Check Inside

Paper has jammed In

the fuser area or

around the toner

cartridge

Clear the jam. (See "In

the paper exit area" on

page 53.)

Refilled Toner

T

The toner cartridge

you have installed is

not genuine or refilled.

The arrow indicates

which color toner

cartridge.

The print quality may get

poor if the refilled toner

cartridge is installed,

since its characteristics

may significantly differ

from the genuine. We

recommend Samsung-

genuine color toner

cartridge.

Replace Toner

T

This message

appears between
Toner Empty

and

Toner Low

status.

Replace the toner

cartridge with a new one.

(See "Replacing the

toner cartridge" on

page 48.)

Replace
[xxx]

The life of the part

expires totally.

Replace the part with a

new one. Call for

service.

Replace
[xxx] Soon

The life of the part

expires soon.

See "Checking

replaceables" on

page 51 and call for

service.

Replace/Install
Toner Waste Bin

The life span of the

waste toner tank has

expired and the printer

will stop printing until

a new waste toner

tank is placed into the

machine.

Replace the waste toner

bank with a new one.

(See "Replacing the

waste toner

container" on page 50.)

Scan Unit Open

The scan unit is not

securely latched.

Close the scan unit it

locks into place.

Scanner locked

The scanner module

is locked

Turn the power switch

off and on. If the problem

persists, call for service.

Send Error
(AUTH)

There is a problem in

SMTP authentication.

Configure the

authentication setting.

Send Error
(DNS)

There is a problem in

DNS.

Configure the DNS

setting.

Send Error
(POP3)

There is a problem in

POP3.

Configure the POP3

setting.

Send Error
(SMTP)

There is a problem in

SMTP.

Change to the available

server.

Send Error
(Wrong Config)

There is a problem on

the network interface

card.

Configure your network

interface card correctly.

[Stop Pressed]

Stop/Clear

has been

pressed during an

operation.

Try again.

MESSAGE

MEANING

SUGGESTED

SOLUTIONS

Toner Empty

T

A toner cartridge has

almost reached its

estimated cartridge

life.

Press OK to toggle

the message to Stop
or Continue or Black
Only

.

W Stop X

If the black

toner cartridge

is empty,
Black Only

message does

not appear.

You can select the

option among Stop,
Continue

or Black Only

with the left/right arrow.

If you select Stop by

pressing OK on the

control panel, the

machine stops printing.

If you select Continue,

the machine keeps

printing, but the quality

cannot be guaranteed.

If you select Black Only,

the machine prints the

data in black. In this

case, the mono printing

feature is preset in the

printer properties.

When you copy, the
Black Start

button will

be activated only with

this condition.

If you do not select any,

the machine will work as
Stop

is selected.

Replace the toner

cartridge for the best

print quality when this

message appears. Using

a cartridge beyond this

stage can result in

printing quality issues.

(See "Replacing the

toner cartridge" on

page 48.)

Toner Exhausted

T

A toner cartridge has

reached its estimated

cartridge life. The

printer stops printing.

Replace the toner

cartridge. (See

"Replacing the toner

cartridge" on page 48.)

Toner Low

T

Small amount of toner

is left in the cartridge.

The estimated

cartridge life of toner

is close.

Prepare a new cartridge

for replacement. You

may temporarily

increase the printing

quality by redistributing

the toner. (See

"Redistributing toner" on

page 47.)

Transfer Belt
Error

A problem has

occurred in the

transfer belt in the

machine.

Turn the power switch

off and on. If the problem

persists, call for service.

Tray
Paper Empty

There is no paper in

the tray.

Load paper in the tray.

Tray
Paper Mismatch

The paper size

specified in the printer

properties does not

match the paper you

are loading.

Load the correct paper in

the tray.

MESSAGE

MEANING

SUGGESTED

SOLUTIONS

Advertising
This manual is related to the following products: