Sony TA-FA1200ES - Manual (Page 5)

5 GB
G
e
tting Star
te
d
Setting the speaker impedance
• Be sure to turn the power off before
adjusting the IMPEDANCE SELECTOR.
• When you connect all speakers with a
nominal impedance of 8 ohms, set the
IMPEDANCE SELECTOR to “8
Ω .” When
connecting other types of speakers, set it to
“4
Ω .”
• When you connect speakers to both the
SPEAKERS A and B terminals, connect the
speakers with a nominal impedance of 8
ohms or higher.
– When you connect speakers with
impedance of 16 ohms or higher in both
“A” and “B” configuration:
Set IMPEDANCE SELECTOR to “8
Ω .”
– For other types of speakers in other
configurations:
Set IMPEDANCE SELECTOR to “4
Ω .”
• If you are not sure of the impedances of the
speakers, refer to the operating instructions
supplied with your speakers. (This
information is often on the back of the
speaker.)
* If you have an additional speaker system, connect
them to the SPEAKERS B terminals. You can
select the speaker system you want to use with the
SPEAKERS (OFF/A/B/A+B) on the front panel
(page 11).
SPEAKERS B terminals*
IMPEDANCE SELECTOR
Speaker A
(L)
Speaker A
(R)