Kerio Tech Version 6.5.2 - Manual (Page 192)

Chapter 4 Data synchronization with mobile devices
192
Figure 4.36 ActiveSync — email synchronization settings
• Only if smaller than — the value entered in this option sets the maximum size
of email attachments to be synchronized. Larger attachments are excluded from
synchronization.
The settings described above help decrease time needed for synchronization as well as
the load of the synchronization on network connection.
6. Once the settings are done, save the configuration by clicking on Finish. Now, the first
synchronization between the device and Kerio MailServer will be started.
During the synchronization, a dialog appears requiring confirmation of appliance of the
security policy (see figure 4.37 ). Use the OK button for confirmation, otherwise the syn-
chronization will not be completed correctly.
Figure 4.37 Wipe confirmation
Other ActiveSync settings are focused in your device’s user’s guide.
4.5.2 ActiveSync settings in Smartphone Edition
It is not necessary to install the ActiveSync application since it is included in the Windows
Mobile operating system (it can be found under Start → ActiveSync).
Before the starting to configurate, it is necessary to check if connection of the device to net-
work is set correctly (required for connection to the mailserver). This can be tested for example
by using Internet Explorer to connect to Kerio WebMail (for details, see chapter 1.2 ).