Talking modulator – KORG Triton Studio User Manual

Page 205

Advertising
background image

194

a: OSC Mode, b: Note Interval, b: Note Fine

The “OSC Mode” parameter selects the oscillator operation mode.
When Note (Key Follow) is selected, the oscillator’s frequency is
determined based on the note number, allowing you to use it as
an octaver. The “Note Interval” parameter sets the pitch offset
from the original note number by semitone steps. The “Note Fine”
parameter allows you to fine-tune in steps of cents.

d: Envelope Pre LPF

This parameter sets the upper limit of the frequency range to
which very low harmonics are added. Adjust this parameter if
you do not want to add lower harmonics to the higher range.

013: Talking Modulator

This effect adds an unusual character, like a human voice, to
the input signal. Modulating the tone via dynamic modula-
tion, you can create an interesting effect that sounds as if the
guitar or synthesizer is talking.

c: Voice Top, d: Voice Center, e: Voice Bottom

These parameters assign vowels to the top, center, and bottom
position of the controller.
E.g.: When “Voice Top”=A, “Voice Center”=I, and “Voice Bot-
tom”=U:
If “Sweep Mode ”is set to D-mod and Ribbon is selected as the
modulation source, moving your finger from the right to left of
the ribbon controller will change the sound from “a” to “i,” then
“u.”
If Sweep Mode is set to LFO, the sound will change cyclically
from “a” to “i,” “u,” “i,” then “a.”

h: Formant Shift

This parameter adjusts the frequency level to which the effect is
applied. If you wish to apply the effect to a higher-range sound,
set this parameter to a higher value; to apply the effect to a lower-
range sound, set this to a lower value.

h: Resonance

This parameter sets the intensity of resonance for the voice pat-
tern. A larger value will add more character to the sound.

c

Fixed Frequency [Hz]

10.0...80.0Hz

Sets the oscillator frequency when OSC Mode=Fixed

Src

Off...Tempo

Selects the modulation source for the oscillator frequency when OSC
Mode=Fixed

Amt

–80...+80Hz

Sets the oscillator frequency modulation amount when OSC
Mode=Fixed

d

Envelope Pre LPF

1...100

Sets the upper limit of the frequency range for which very low har-
monics are added

e

Envelope Sens (Envelope Sensitivity)

0...100

Sets the sensitivity with which very low harmonics are added

Envelope Shape
Sets the oscillator’s volume envelope curve

–100...+100

f

Wet/Dry

Dry, 1:99...99:1, Wet

Sets the balance between the effect and dry sounds

Src

Off...Tempo

Selects the modulation source of the effect balance

Amt
Sets the modulation amount of the effect balance

–100...+100

a

Sweep Mode

D-mod, LFO

Switches between modulation source control and LFO control

b

Manual Voice Control

Bottom, 1...49, Center, 51...99, Top

Voice pattern control

Src

Off...Tempo

Selects the modulation source that controls the voice pattern

c

Voice Top
Selects a vowel sound at the top end of control

A, I, U, E, O

d

Voice Center
Selects a vowel sound in the center of control

A, I, U, E, O

e

Voice Bottom

A, I, U, E, O

Selects a vowel sound at the bottom end of control

Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out

Left

Right

Wet / Dry

Wet / Dry

+

D

-mod

Voice Top: A

Voice Center: I

Voice Bottom: U

A

-

I

-

U

-

E

-

O

Talking Modulator

LFO

D-mod

LFO

Sweep Mode

f

LFO Frequency [Hz]

0.02...20.00Hz

Sets the LFO speed

Fx:009,

Src
Selects the modulation source of LFO speed

Off...Tempo

Amt

–20.00...+20.00Hz

Sets the modulation amount of LFO speed

g

BPM/MIDI Sync

Off, On

Switches between using the frequency of the LFO speed and using
the tempo and notes

Fx:009,

BPM
Selects MIDI Clock and assigns tempo

MIDI, 40...240

Fx:009

Base Note

Selects the type of notes that specify the LFO speed

Fx:009

Times

x1...x16

Sets the number of notes that specify the LFO speed

Fx:009

h

Formant Shift

–100...+100

Sets the frequency to which the effect is applied

Resonance
Sets the Level of resonance of the voice pattern

0...100

i

Wet/Dry

Dry, 1:99...99:1, Wet

Sets the balance between the effect and dry sounds

Src

Off...Tempo

Selects the modulation source of the effect balance

Amt
Sets the modulation amount of the effect balance

–100...+100

+ Max

Zero

D

-mod

– Max

Voice Bottom

Voice Center

Voice Top

U

I

A

A

O

E

JS X
Ribbon

JS +Y
JS –Y
etc…

Zero

+ Max

Talking Modulator Control

Advertising