KORG Triton Studio User Manual
Page 65
54
0–1H: Save Template Song
(Save as User Template Song)
This command saves the program selections, track parame-
ters, and effect settings etc. of the current song as a user tem-
plate song U00–15. The settings you save here can also be
loaded in Song Play mode.
1
Select “Save Template Song” to access the dialog box.
2
In “To,” specify the user template song (U00–15) in
which the data will be saved.
3
To save the template song, press the OK button. To can-
cel, press the Cancel button.
Be aware that when you execute this command, all set-
ting data of the save destination User Template Song will
be erased and rewritten with the current settings.
0–1I: FF/REW Speed
This allows you to set the speed at which fast-forward or
rewind will occur when you press the [FF] key or [REW]
key.
1
Select “FF/REW Speed” to access the dialog box.
2
In “Speed,” specify the speed (relative to the playback
tempo) at which fast-forward and rewind will occur.
This setting is relative to the playback tempo.
With a setting of 2, this will occur at double the playback
tempo; with a setting of 3, triple the tempo; and with a
setting of 4, quadruple the tempo. However in sections
where the playback data is dense, the fast-forward or
rewind speed may slow down.
3
If “Ignore Tempo” is checked, the playback tempo and
note length will be ignored, and fast-forward and rewind
will be performed as fast as possible. The speed of fast-
forward and rewind will differ between sections where
the playback data is dense and sections where it is sparse.
If this item is unchecked, fast-forward and rewind will
be performed at the speed you specify for “Speed.”
4
To execute the settings, press the OK button. To cancel,
press the Cancel button.
0–1J: Set Location (Set Location for Locate Key)
When you press the [LOCATE] key, you will move to the
location specified here.
1
Select “Set Location” to access the dialog box.
2
In “Location,” specify the location to which you will
move when you press the [LOCATE] key. If you specify
001:01:000
, you will move to the beginning of the song
when you press the [LOCATE] key.
3
To execute the settings, press the OK button. To cancel,
press the Cancel button.
When this dialog box is not open, you can hold down
the [ENTER] key and press the [LOCATE] key to set the
current location as the “Set Location” value.
0–1K: GM Initialize
This command transmits a GM System On message to the
Sequencer mode, resetting all tracks to the GM settings
(
☞table below).
GM Initialize Parameter
Parameter
Track1–9, 11–16
Track10
P0
Bank/Program (Program Select)
G001:Acoustic Piano
g(d)001:STANDARD Kit
Pan
C064
C064
Volume
100
100
P1
Status
–
–
The setting remains unchanged
Use Program’s Scale
–
–
The setting remains unchanged
P7
Arpeggiator Assign
–
–
The setting remains unchanged
Other Arpeggiator parameters
–
–
The setting remains unchanged
P8
IFX/Indiv.Out BUS Select
L/R
DKit
Send1(MFX1)
0
0
Send2(MFX2)
40
40
IFX1–5
–
–
The setting remains unchanged
Pan(CC#8)
–
–
The setting remains unchanged
BUS Select
–
–
The setting remains unchanged
Send1
–
–
The setting remains unchanged
Send2
–
–
The setting remains unchanged
Other Insert Effect parameters
–
–
The setting remains unchanged
P9
MFX1
–
–
016: Stereo Chorus
MFX2
–
–
053: Reverb SmoothHall
Return1
–
–
127
Return2
–
–
050
Other Master Effect and Master EQ parameters
–
–
Default settings